Keeping a property comfortable can mean using different HVAC systems for different spaces. Some areas may need their own dedicated heating and cooling, while others are better served by a ducted system.
At Centre Park at Stone Ridge, our team completed both types of work. We installed six ductless mini-split systems for the elevator rooms and a separate heat pump system for another part of the property.
Each area had different needs, so the installation was planned around how the space would be used. The elevator rooms received individual systems, while the heat pump was connected to ductwork to serve a larger area.
HVAC Work Completed at Centre Park at Stone Ridge
For the elevator rooms, we installed six separate ductless mini-split systems. Each one included a wall-mounted indoor unit and its own outdoor condenser, giving every room dedicated heating and cooling.
We also installed a separate ducted heat pump system for another area of the property. That system included an indoor air handler, an outdoor heat pump unit, and the connections needed to work with the existing ductwork.
Project Scope
- Six ductless mini-split systems for elevator rooms
- Six wall-mounted indoor units
- Six outdoor condenser units
- Refrigerant line connections
- Condensate drainage
- Electrical and control connections
- One ducted heat pump system
- Indoor air handler
- Outdoor heat pump unit
- Ductwork connections
- Final startup and system testing
Installing Six Ductless Mini-Split Systems for the Elevator Rooms
The elevator rooms at Centre Park at Stone Ridge needed their own temperature control instead of relying on the building’s main HVAC system.
These rooms can hold equipment that gives off heat during normal operation, and they are often separated from the main conditioned areas of the building. Giving each room its own system helps maintain a more stable temperature without extending the building’s main ductwork into the space.
We installed six separate ductless mini-split systems, with one system serving each elevator room.
For each installation, our team:
- Mounted the indoor unit securely in the elevator room
- Set the outdoor condenser on a solid, level base
- Ran the refrigerant line set between the indoor and outdoor units
- Installed the condensate drain to carry moisture away from the indoor unit
- Completed the electrical and control connections
- Sealed the wall penetration where the line set passed through
- Checked the system controls and connections
- Started and tested the system to confirm proper operation
With each room served by its own unit, the heating and cooling can be managed independently based on the conditions in that space.
Why Ductless Mini-Splits Work Well for Elevator Rooms
Ductless mini-splits are a practical fit for rooms that need dedicated heating and cooling but do not need a full ducted system.
Because the indoor unit delivers conditioned air directly into the room, there is no need to extend large sections of ductwork into the space. The equipment is also compact, which makes it well suited for isolated rooms and other areas where space can be limited.
For this type of application, the main advantages are:
- Independent temperature control
- No large ductwork required
- Compact indoor and outdoor equipment
- Well suited for isolated rooms or dedicated spaces
- Can operate independently from the building’s central HVAC system
For Centre Park at Stone Ridge, that gave each elevator room its own dedicated system without adding unnecessary complexity to the rest of the building.
A Closer Look at the Mini-Split Installation
A ductless mini-split has two main parts: a wall-mounted indoor unit and an outdoor condenser.
The indoor unit delivers conditioned air directly into the elevator room, while the outdoor unit handles the heat transfer outside the building. The two pieces of equipment are connected by a refrigerant line set, electrical and control wiring, and condensate drainage.
This setup keeps the system compact while still providing both heating and cooling to the room it serves. It also allows each elevator room to have dedicated climate control without depending on the building’s main ducted HVAC system.
Installing the Separate Heat Pump System
The heat pump installation served a different part of the property and required a more traditional ducted setup.
Our team installed the indoor air handler, connected it to the existing ductwork, and set the outdoor heat pump unit in place. From there, we ran the refrigerant lines between the two components, completed the condensate drainage, and connected the electrical components and controls.
Once the system was in place, we checked the airflow through the ductwork and tested both heating and cooling operation to make sure the system was responding properly.
Unlike the mini-splits used for the elevator rooms, this heat pump works through ductwork to condition a larger area.
Heat Pump Installation Process
Our team:
- Installed the indoor air handler
- Connected the air handler to the existing ductwork
- Set the outdoor heat pump unit in place
- Ran and connected the refrigerant lines
- Completed the condensate drainage
- Connected the electrical components and controls
- Checked airflow through the system
- Tested heating and cooling operation
How the Heat Pump System Works
A heat pump can provide both heating and cooling using the same system.
During warmer weather, it moves heat out of the building. In colder weather, it works in reverse and moves heat into the building.
The indoor air handler then distributes that conditioned air through the ductwork, allowing the system to serve a larger area than a single-room ductless unit.
HVAC Services for Multifamily and Property-Managed Buildings in Aldie, VA
Multifamily and property-managed buildings often need more than one type of HVAC service. From ductless mini-split installation and heat pump replacement to repairs, maintenance, and system troubleshooting, the work needs to fit the layout and demands of the property.
McDaniel Service provides dependable HVAC services in Aldie, VA for apartment communities, condominium properties, managed residences, and light commercial spaces. Whether you need a mini-split installation, heat pump service, or a contractor who can handle multiple systems across one property, our team can help keep the work organized and moving smoothly.
Why Property Owners and Managers Choose McDaniel Service
McDaniel Service has served Northern Virginia since 2010, backed by decades of hands-on HVAC and plumbing experience. Our team works across residential and light commercial systems, including ductless mini-splits, heat pumps, gas furnaces, boilers, rooftop units, water heaters, plumbing, gas fitting, and electrical work.
That range of experience is especially useful on properties where several systems need to be handled at once. McDaniel Service is licensed across multiple trades, holds a DPOR Class A Contractor license, and brings a practical, straightforward approach to repairs, replacements, and full system installations.
Completed HVAC Project at Centre Park at Stone Ridge
With the work complete, Centre Park at Stone Ridge now has six ductless mini-split systems serving the elevator rooms and a separate ducted heat pump system serving another area of the property.
The finished setup gives the elevator rooms their own dedicated climate control while the heat pump provides heating and cooling through the building’s ductwork. Each system was installed around the needs of the space it serves, giving the property a more practical and well-matched HVAC setup.
Need Mini-Split or Heat Pump Installation in Aldie, VA?
If you need dependable ductless mini-split installation, heat pump installation, HVAC repair, maintenance, or system replacement in Aldie, VA, our team can help.
McDaniel Service provides reliable heating and cooling services for homeowners, property managers, multifamily communities, and light commercial properties throughout Aldie and Northern Virginia. Contact us to schedule service or discuss your next HVAC project.